1 Concept Modelling
2 Modelling for Production
- W2.1. Charger : Construction Tolerances for Production
- W2.2. Charger : Dimensions and Draft Angles
- W2.3. Charger : Stitching and Exporting IGES & STEP
- W2.4. Charger : Exporting STL for Rapid prototyping
- W2.5. Wheel: Revolving Wheel Geometry
- W2.6. Wheel : Construction Planes
- W2.7. Wheel : Surface Fillet for G2 and G3 Radius Blends
- W2.8. Wheel : Solving Stitching Problems
Download the Data Files for W2
3 Technical Surfacing
Resources
Alias Golden Rules
- 1- Single-Span = Smooth Curves/Surfaces
- 2 - NURBS = Four-sided Surfaces
- 3 - Create a Good 'Flow' of CVs
- 4 - Use Minimum Number of CVs
- 5 - Work 'Big' to 'Small'
- 6 - Build to Theoretical edges
- 7 - Set Construction Tolerances at the start
- 8 - Ensure Tangency across a Centre-Line
- 9 - Avoid building from trimmed edges
- 10 - Match curves on opposite sides
Theory Builders
- 1 - NURBS 1 : Introduction
- 2 - NURBS 2 : Terminology
- 3 - Continuity 1 : G0, G1, G2, G3
- 4 - Continuity 2 : Construction Tolerances
- 5 - Evaluation 1 : Curve Curvature
- 6 - Evaluation 2 : Reflection Lines & Iso Angle
- 7 - Evaluation 3 : Surface Curvature
- 8 - Trimming & Curves-on-Surface
- 9 - Circles and Revolves
- 10 - Understanding Class A modeling